Label-free impedimetric detection of glycan-lectin interactions

A compact biosensor for a label-free, rapid (<80 s) detection of glycan-lectin interactions using ac impedance measurements was developed for the first time. A galactose-binding peanut agglutinin (PNA) and sialic acid-binding Sambucus nigra agglutinin (SNA) were covalently surface-immobilized on the layered Cu/Ni/Au printed circuit board (PCB) electrodes. Samples of artificial and natural glycoconjugates consisting of (1) gold glyconanoparticles encapsulated with approximately 90-100 copies of TF-antigen disaccharide Galalpha1-3GalNAc (TF-AuNP), (2) asialofetuin (ASF) containing both LacNAc (Galbeta1-4GlcNAc) and TF-antigen, and (3) fetuin (FET), the sialylated glycoform of ASF. The samples were run separately on PNA- and SNA-immobilized PCB electrodes. Our results indicate that TF-AuNP could be rapidly and reliably detected up to 1 pg/mL (13 fM) concentration on PNA electrode but, as expected, yielded no response on the SNA electrode. ASF and FET glycocoproteins were unambiguously detectable up to 10 pg/mL (150 fM) on PNA and SNA electrodes, respectively. Moreover, the technique allowed us to observe glyco-microheterogeneity of FET as well as establish the presence of two isoforms of SNA lectin, SNA-I and SNA-II, in one of the vendor's formulations. Further elaboration of the described technology into novel electrochemically driven lectin arrays may find applications in diagnosis of cancer and other diseases with multiple glycobiomarkers or as a rapid low-cost bioanalytical tool for glycoproteome analyses.     

Compositional,temperature and frequency dependence of dielectric behaviour of zinc substituted copper- ferri-chromates

The comprehensive study on compositional, temperature and frequency dependent dielectric properties of Zn_xCu_1−xFeCrO₄ (x = 0.0, 0.2, 0.4 and 0.6 ) was carried out by means of a. c. resistivity (ρ_ac), dielectric constant (ε′) and loss tangent (tanδ) measurements in the frequency range from 100 Hz to 1 MHz at different temperatures ranging from 40 °C to 500 °C. An abnormal behaviour of ε′ as a function of temperature is explained on the basis of contribution of two types of charge carriers in the polarization process. It is found that magnetic ordering does not have marked influence on the dielectric properties. The probable conduction mechanism in the present system is due to electron transition such as Fe²⁺ Fe³⁺ and Cu²⁺ Cu¹⁺ rather than ionization or polaron hopping mechanism.     

Biodosimetry using chromosome aberrations in human lymphocytes

In vitro dose-response calibration curves for (60)Co gamma rays have been established for unstable chromosome aberrations in human peripheral blood lymphocytes. The observed dose-response data were fitted to a linear quadratic model. The calibration curve parameters were used to estimate the equivalent whole-body dose and dose to the irradiated region in partial body irradiation of cancer patients. The derived partial body doses and fractions of lymphocytes irradiated were in agreement with those estimated from the radiotherapy regimes.     

Sustained release microspheres of diclofenac sodium using PEGylated rosin derivatives

The PEGylated derivatives of rosin-PD-1 and PD-2 synthesized and characterized earlier (Nande et al., 2006) were investigated as potential materials for sustained release microsphere prepared by emulsion solvent evaporation method using diclofenac sodium (DCS) as model drug. All the microspheres exhibited smooth surfaces intercepted by pores; their sizes (d(90)) ranged between 11-24 microm. The entrapment efficiency (< 80%) of the microspheres increased proportionally with derivative concentration. Presence of solvent like isopropyl alcohol or dichloromethane rendered the microspheres with large sizes but with reduced drug entrapment. Microspheres with small size were obtained at an optimum viscosity of liquid paraffin; any change lead to increase in the particle size. Magnesium stearate was found to be most suitable detackifier in the present system. The drug release was directly related to the particle size--small sized microspheres released drug at a faster rate. The dissolution data complied with Higuchi equation while the mechanism of drug release was Fickian diffusion (n approximately 0.5). Controlled inhibition of edema, as tested by hind paw edema method, was observed for 10 h when the microspheres were administered intraperitoneally. The present study found the derivatives as promising materials for preparing microspheres for sustained delivery of DCS.     

Fundamental building blocks for molecular biowire based forward error-correcting biosensors

This paper describes the fabrication, characterization and modeling of fundamental logic gates that can be used for designing biosensors with embedded forward error-correction (FEC). The proposed logic gates (AND and OR) are constructed by patterning antibodies at different spatial locations along the substrate of a lateral flow immunosensor assay. The logic gates operate by converting binding events between an antigen and an antibody into a measurable electrical signal using polyaniline nanowires as the transducer. In this study, B.?cereus and E.?coli have been chosen as model pathogens. The functionality of the AND and OR logic gates has been validated using conductance measurements with different pathogen concentrations. Experimental results show that the change in conductance across the gates can be modeled as a log-linear response with respect to varying pathogen concentration. Equivalent circuits models for AND and OR logic gates have been derived based on measured results.     

Potent inhibitors of the human UDP-glucuronosyltransferase 2B7 derived from the sesquiterpenoid alcohol longifolol

The tricyclic sesquiterpenol (+)-longifolol served as a lead structure for the design of inhibitors of the human UDP-glucuronosyltransferase (UGT) 2B7. Twenty-four homochiral and epimeric longifolol derivatives were synthesized and screened for their ability to inhibit the enzyme. The absolute configuration at the stereogenic center C1' was determined by X-ray crystallography and 2D NMR spectroscopy (gHSQC, gNOESY). The phenyl-substituted secondary alcohol 16 b (beta-phenyllongifolol) displayed the highest affinity toward UGT2B7, and its inhibitory dissociation constant was 0.91 nM. The mode of inhibition was rapidly reversible and competitive. The inhibitor was not glucuronidated by UGT2B7 or other hepatic UGTs, presumably as a result of the high steric demand exerted by the phenyl group. Inhibition assays employing 14 other UGT isoforms suggested that inhibitor 16 b was highly selective for UGT2B7.     

Environmental implications of municipal solid waste-derived ethanol

We model a municipal solid waste (MSW)-to-ethanol facility that employs dilute acid hydrolysis and gravity pressure vessel technology and estimate life cycle energy use and air emissions. We compare our results, assuming the ethanol is utilized as E85 (blended with 15% gasoline) in a light-duty vehicle, with extant life cycle assessments of gasoline, corn-ethanol, and energy crop-cellulosic-ethanol fueled vehicles. We also compare MSW-ethanol production, as a waste management alternative, with landfilling with gas recovery options. We find that the life cycle total energy use per vehicle mile traveled for MSW-ethanol is less than that of corn-ethanol and cellulosic-ethanol; and energy use from petroleum sources for MSW-ethanol is lower than for the other fuels. MSW-ethanol use in vehicles reduces net greenhouse gas (GHG) emissions by 65% compared to gasoline, and by 58% when compared to corn-ethanol. Relative GHG performance with respect to cellulosic ethanol depends on whether MSW classification is included or not. Converting MSW to ethanol will result in net fossil energy savings of 397-1830 MJ/MT MSW compared to net fossil energy consumption of 177-577 MJ/MT MSW for landfilling. However, landfilling with LFG recovery either for flaring or for electricity production results in greater reductions in GHG emissions compared to MSW-to-ethanol conversion.     

Electrochemically grown Pd nanoparticles used for synthesis of carbon nanotube by microwave plasma enhanced chemical vapor deposition

Pd nanoparticles of well-defined shapes with face centered cubic structure were grown electrochemically on silicon substrates with high degree of reproducibility. As direct application of these electrochemically grown Pd nanostructures they have been used as catalyst for the growth of multi wall carbon nanotube (MWCNT). It is observed that the MWCNTs are filled with a Pd based material during growth by microwave plasma enhanced chemical vapor deposition (MPECVD) technique. High-resolution transmission electron microscopy, used to study the material inside MWCNT suggests the formation of PdH0.649 or Pd2Si during the growth of carbon nanotube. Raman spectroscopy has been used to study the structure of the MPECVD grown carbon nanotubes.     

Improvement of fuel properties of cottonseed oil methyl esters with commercial additives

The low temperature operability and oxidative stability of cottonseed oil methyl esters (CSME) were improved with four anti‐gel additives as well as one antioxidant additive, gossypol. Low temperature operability and oxidative stability of CSME was determined by cloud point (CP), pour point (PP), cold filter plugging point (CFPP), and oxidative stability index (OSI). The most significant reductions in CP, PP, and CFPP in all cases were obtained with Technol®, with the average reduction in temperature found to be 3.9 °C. Gunk®, Heet®, and Howe's® were progressively less effective, as indicated by average reductions in temperature of 3.4, 3.0, and 2.8 °C, respectively. In all cases, the magnitude of CFPP reduction was greater than for PP and especially CP. Addition of gossypol, a polyphenolic aldehyde, resulted in linear improvement in OSI (R² = 0.9804). The OSI of CSME increased from 5.0 to 8.3 h with gossypol at a concentration of 1000 ppm.     

Electron microscopy of shock deformation in alumina

Shock recovered samples of a coarse grain (10 μm), high density (>99.9% theoretical) alumina from asymmetric impact tests conducted at 6.5 GPa (e.g. 3.2 times its Hugoniot Elastic Limit) in a single stage gas gun and characterized by X-ray diffractometry, scanning and field emission scanning electron microscopy, and transmission electron microscopy showed prolific presence of reduced crystallite size, higher average microstrain, grain localized micro/nano-scale deformations, micro-cleavages, grain-boundary microcracks, micro-wing crack formation, extensive shear induced deformations and fractures localized at grains, grain boundaries and triple grain junctions, grain localized entanglement of dislocations and their pile up impeded at grain boundaries. A new qualitative model based on micro-shear and micro-twist induced deformation and fracture in single and/or multiple planes in suitably oriented grain and/or grain assembly was developed to explain the experimentally observed damage evolution process.